BALL VALVE MANUFACTURER IN GERMANY

Ball valve manufacturer in Germany

Ball valve manufacturer in Germany

Blog Article

Valves only in Europe leading  Ball Valve Manufacturer in Germany A ball valve is a type of quarter-turn valve that controls flow by pivoting a drilled ball. Fluids or gasses can pass through when the hole aligns with the flow direction; however, turning the ball 90 degrees entirely blocks the flow.

Function

A ball valve is a spherical disc with a bore in the center that may be aligned with the flow route or closed off, making it adaptable and appropriate for a wide range of applications due to its simple yet effective design. 

Types


  • Double block and bleed ball valve

  • Forged steel ball valve

  • Floating ball valve

  • Fully welded ball valve

  • Top entry ball valve

  • Trunnion ball valve

  • Jacketed ball valve


Industries

  • Oil and Gas

  • Chemical and Petrochemical

  • Water Treatment

  • Power Generation

  •  Marine

  • Offshore.


Parts of a ball valve

  • Valve Housing

  • Ball

  • shaft

  • Bonnet

  • Seat

  • electric actuator 


Where ball valve is used 

Ball valves are used as fluid shutdown valves in both onshore and offshore oil and gas production facilities. Another prominent application for ball valves is to provide furnaces with fuel gas. Ball valves can regulate the flow of high-pressure gases and liquids while minimizing pressure loss. These valves can be opened and closed fast due to their low response time and low-torque, tight-sealing capability.

Valves only in Europe leading Ball Valve Manufacturer in Germany. One of the advantages of ball valves is that they may be easily put in a variety of remote sites in the petrochemical industry. Most oil and gas facilities are located in remote places, so a valve that is simple to use and maintain makes a lot of sense.

There are several types of ball valves, including reduced bore, full bore, V-port, floating-type, and genuine union. Their basic design allows them to work well under low to moderate pressure. However, excessive pressure can impair the valve's sealing ability. For high-pressure and high-temperature applications, use a metal seat valve. Consider using a metal emergency seat seal while handling dangerous fluids. These seals are affixed to the ball and may be constructed of brass, aluminum, steel, or cast iron. Selecting the appropriate ball valve is critical for a variety of applications.

Materials used in construction of ball valve

  • Brass: Brass, a copper and zinc alloy, is a popular material for ball valves due to its strength, durability, and ability to withstand high temperatures and pressures. Its dull yellowish to reddish hue varies depending on the zinc concentration.



  • Stainless steel: Stainless steel, a high-strength alloy with excellent corrosion resistance due to high chromium and nickel content, maintains its strength and durability even under high temperatures and pressures, making it a reliable material for demanding applications.


Valve body styles

  • Split body ball valve: The design consists of a two-part body joined by a flange, with one smaller component and the ball put into the bigger.

  • Top Entry Ball Valve: Top-entry ball valves have a removable top that allows for easy assembly, disassembly, repair, and maintenance.

  • End-Entry ball valve: These types of ball valves feature a singular main body, with the ball being introduced through one end.


 

What are Ball Valve Designs

 There are two types of ball designs: floating and trunnion, with floating being the most popular and trunnion being more expensive. Cupped seats support floating balls, whereas spring-loaded trunnion balls revolve on their axis.Trunnion valves typically exhibit reduced operating torque.

  • Ball Valve hole designs: A full-bore design, often referred to as a full-port design, is characterized by a bore diameter that is equivalent to the pipe diameter, thereby minimizing friction losses. 

  • Reduce bore: Most ball valves feature commonly found in many ball valves, has a smaller diameter that may result in slight friction losses.

  • V-shaped: V-shaped bores in the ball or valve seat can accurately control flow rate during ball rotation.

  • Vented: A vented ball valve has a small hole punched into the upstream side to prevent excess pressure within the valve.


Advantages

In comparison to casting or machining, forged ball valves are more durable and sturdy. They are highly corrosion resistant and can be produced from materials such as stainless steel and alloy steel. Ball valves enable accurate flow control simply rotating a ball, making them simple to use and need little maintenance. They are also well-known for their ability to open and close quickly.

 

Description:

Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron.

PN- PN10 to PN450

Class: 150-2500

Size: 1/2”- 48”.

Operations: Lever operated ball valve, electric actuated ball valve, pneumatic actuated ball valve, gear operated ball valve

Ends: Flanged, Butt weld, Socket weld, Threaded 

Visit us: https://www.valvesonlyeurope.com/product-category/ball-valve/

Report this page